Polystyrene recycling is worth your investment in professional Polystyrene recycling machine

As we all know, the volume-to-weight ratio of EPS foam waste is not conducive to transportation and storage after use because of its high economic cost. Since polystyrene foam boxes and packaging waste occupies a lot of space in the dump box, the running cost of truck collection or disposal is very high. Alternative packaging materials are of no avail because polystyrene is the best packaging material for many commercial and industrial uses. Do not worry. Equipped with a Polystyrene densifier, this problem can be solved easily.

GREENMAX

Status of polystyrene recycling


We know that once the valuable EPS (polystyrene) packaging is delivered to the user, the used EPS foam material will become waste and will soon occupy a lot of space in the waste collection box. Hundreds of thousands of tons of EPS foam waste are currently sent to landfills instead of being recycled. Although there are many difficulties to recycle EPS foam, we should still increase the recovery rate of EPS foam.


It is estimated that 12,000 tons of EPS foam waste will be disposed of in landfills each year, covering an area of 240,000 cubic meters. Currently, many councils and environmental service providers are involved in EPS recycling. It is worth mentioning that communities and individuals also follow the EPS recycling program on many occasions.


Are EPS recycling and processing necessary?


The world witnessed the scientific and technological achievements obtained in all walks of life, and the influence of science and technology is increasing. While we are proud of human progress, the development of industrialization inevitably brings about a global environmental problem: “climate change.”


This has attracted worldwide attention. With the widespread use of foam in various industries, there is no doubt that foam recycling and effective waste management are essential to protect the environment. Technological advances in the foam recycling field are changing the entire recycling pattern. The waste management industry is changing by using EPS densifier.


EPS densifier


Polystyrene recycling equipment


The styrofoam compactor is a good example of how companies and governments can invest in and get rich profits from this technologically advanced equipment. It not only helps to save company costs but also handles heavyweight recycling tasks. Not only the recycling industry but also the waste management industry has witnessed the necessary development, which has changed the traditional view of foam waste. It is large and light, so the transportation and storage costs are very high.


Since the foam compactor equipment was invented, the volume of foam waste will be greatly reduced. Moreover, it can be recycled to produce photo frame hangers through granulation and recycling.

A styrofoam densifier is a melting machine used to handle the crushing, melting, and extrusion process of styrofoam. Unlike other series of machines, this machine can even melt wet polystyrene materials into fish boxes. In these processes, the loose styrofoam will become a dense block with a compression ratio of 90:1, which greatly facilitates transportation and recycling operations.


foam recycling machine


The general operation process of Styrofoam hot melting machine


First put the styrofoam or what we call polystyrene foam into the foam hot melt machine, where it is crushed and cut into small pieces. These foam blocks are then dropped into the screw, heated by thermochemical reaction, and finally extruded from the output.


The high-volume extrusion technology can help the output material to collect the original foam volume as high as 1/90 of the original foam volume. Usually, these foam hot frit blocks will be purchased to be recycled into other products, and then flowed into the market again.

What can we do now? It is wise for us to recycle recyclable plastic products such as EPS. EPS recycling now has a certain scale worldwide, but few companies have a complete system. Intco Recycling is both a manufacturer and end-user of EPS materials. The company provides foam recyclers and some end-users with advanced foam recycling machine to help some companies to solve the problem of EPS recycling. INTCO also bought back the foam blocks. After recycled, foams are processed and turned into beautiful photo frames.

Comments are closed.

Skip to toolbar