Styrofoam densification can be carried out with heat (thermal densification), or without heat (cold compaction).
Cold compaction involves crushing and compacting Styrofoam by machine. The compacted materials are extruded into a solid ‘log’. The log is cut to length to fit onto a pellet. It is usual for the compacted Styrofoam to be stored on-site until 5 to 20 metric tones are available, as this makes transport and distribution more cost-effective. The more densely compacted the Styrofoam is, the better, since a higher weight of Styrofoam can be loaded for transport and a higher price per tone may be paid by the recycler. Cold compaction can reduce Styrofoam volume down to one-fortieth of the original.
Thermal densification involves breaking up and melting Styrofoam inside a controlled-temperature chamber. The temperature is controlled to allow the Styrofoam to melt without burning. This collapses the expanded foam cells, enabling it then to be recycled into other products. Higher compaction ratios (up to 95% volume reduction) can be achieved using the melting method that involves heating the expanded polystrene to a very high temperature to compress the product. This type of reycling involved a hot element that needed to remain powered throughout the day, and this proved to be very energy inefficient and posed safety hazards due to the off-gassing of chemicals.On-and-off operation of the machine can be a big waste of energy and time because of cooling and re-heating of the machine.


