EPS foam and XPS foam are widely used. When it comes to these two materials, we have to mention their application in the construction industry. The application of EPS foam and XPS foam in the field of construction is mainly to make insulation boards. It is almost an indispensable material in the construction industry. EPS/XPS foam has good thermal insulation, waterproof, sound insulation, and other performances as a thermal insulation board. This material is light in weight and will not affect the structure of the house itself. It has become a popular building material for years.
Depending on the final color of the EPS boards, EPS insulation boards can be created from white or gray polystyrene raw material. Around 3% of graphite is present in the raw material for gray polystyrene, which somewhat improves the material's ability to insulate. Heating polystyrene granules containing 4-6% pentane with water vapor results in the production of EPS insulating boards. After that, a hot wire is used to cut the block to the required size. 600 mm broad by 1200 mm long with a thickness of 10 to 200 mm constitutes a standard size. Half of the pentane is discharged both during production and right away. The same method is used to recycle any production leftovers. Among them, the XPS insulation board usually appears in blue or other colors, and the usage is slightly less than that of the EPS insulation board, but the overall usage is also a lot.
EPS has been used in construction applications since before the 1970s. Widely used in walls, roofs, and floors, its compressive strength can be tailored for specific systems such as beam and block construction, underfloor heating systems, and concrete slabs. It is also specified for void filling and at higher densities as a foundation for road or rail embankments where conventional fill materials are too heavy. As the most widely used insulation board, it needs to be cut during the manufacturing process. Cutting it into boards of uniform size is more convenient to be used. How to deal with these cut-off scraps? These waste EPS foam and XPS foam should actually be recycled. As non-degradable garbage, the final solution is recycling and utilization, which can well avoid environmental pollution.

Waste generated during the production of EPS/XPS insulation boards can be recovered by using a foam compactor. GREENMAX foam compactor can also be called cold foam compactor or foam screw compactor. GREENMAX Apolo series foam compactor adopts compression technology. The main role of extrusion is the screw connected after the crushing device. Therefore, this A series foam compactor is also called It is called foam screw compactor. Before screw extrusion, the crushing device has broken the EPS/XPS foam into small pieces, which is helpful for subsequent compression. The compression ratio of this foam recycling machine is about 50:1, and the compression ratio is ideal. It is a suitable device that can effectively recycle EPS foam and XPS foam.

The recycled foam can be remanufactured into new plastic products, and can even be added to new foam insulation boards in a certain proportion, saving raw materials and achieving resource recycling. At present, adding a certain proportion of recycled materials to plastic products has become a common phenomenon, even a trend. When you have a foam compactor, you will complete recycling activities efficiently.






