Recycling equipment such as Styrofoam densifiers need to be checked in time

Styrofoam densifier is a common machine used to recycle waste foam. Usually, the foam is squeezed out by pressure generated by spiral rotation, so as to be cold-pressed and compressed. We still have to master the relevant methods in the daily use process, so as to avoid failures later.

Greenmax-foam-densifier-mars-machine
1. The Styrofoam recycling machine needs to be operated by relevant professionals in use, and the main engine cannot be operated under no-load conditions, which is also to avoid scratches on the screw and barrel. When preparing to shut down, it is necessary to ensure that there is material in the barrel to start up again, and it cannot be turned on if it does not reach the specified temperature to avoid damage.

2. There should be no other impurities at the feeding port to keep the raw materials clean, which is also to avoid damage to the rotary knife, barrel and screw. If the machine is found to be abnormal during the operation of the Styrofoam recycling machine, it needs to be repaired in time.

3. Timely and regularly check whether the parts are loose. If there is looseness, it needs to be fixed in time. Adjust the screw rods on both sides to withstand the reducer, mainly to prevent the mechanical displacement. All operations need to be carried out in a shutdown state.

In summer no matter whether it is maintenance or operation, the Styrofoam recycling machine generally does not have major problems. Then, when the temperature is low (winter), you need to pay attention to these:

styrofoam-compactor-for-fish-boxes

In addition to relying on the screw thrust, the production process of the Styrofoam recycling machine mainly uses the corresponding thermal energy to melt the raw materials. The temperature given by the heating ring itself and its own temperature during the screw advance work together. However, the heating ring is mainly related to the temperature. It is cold in winter and needs to increase the preheating time. In some cities with very low temperature, it is recommended to install the styrofoam densifier indoors, so that the operation of the machine will not be affected by the problem of outdoor temperature.

GreenMax-exceeds-1000-units

At present, the styrofoam densifiers we often see on the market are all heated by twin-screw segments. There are 7 heating rings on the main engine. The total power of the heating rings is also maintained at about 8kw, and the heat generated during full-load production is It is very large and can supply people's basic needs.

In addition to the styrofoam densifier, there are many other foam recycling related machinery, which also play a key role in the reuse of resources, providing a guarantee for our environment. On the premise of not wasting resources, resources can be recycled Reuse. The harm of waste foam cannot be underestimated. If it is not handled properly, it will not only harm our environment, but also our health.

Greenmax-1000-sets

As a circular economy development enterprise attached to foam recycling and reuse, INTCO Recycling is based in China and faces the world. Just last week, GREENMAX, a world-renowned brand of Styrofoam recycling machines, just shipped the 1000th Styrofoam recycling equipment from the factory. The shipment of 1,000 units is an affirmation of GREENMAX's 10-year efforts. The shipment of 1,000 units is also another starting point for GREENMAX's new journey.

Facing the needs of different countries, different regions, different governments and different industries for foam recycling, we have been constantly learning and improving. Tolerating differences and understanding differences can we continuously improve ourselves, so that our customers can truly solve the pain points and difficulties of foam recycling through INTCO Recycling. Foam recycling is not something that can be done by a simple machine. Faced with the problem of subsequent processing of recycling, it has become profitable. INTCO recycling has also been helping our customers to maximize their profits.
greenmax-factory-foam-densifier

2021 is the peak year of INTCO recycling. It will be listed in July and move to a new factory. Every INTCO person has a bright smile on their face. In 2021, we have faced many challenges and overcome them one by one. We have also encountered many thanks and felt warm. We have always loved to help customers solve problems while bringing them financial benefits.

Comments are closed.

Skip to toolbar