Polystyrene recycling treatment method

Polystyrene plastic products have excellent insulation and transparency, the use temperature is 0 ~ 70 ℃.

Typical uses: product packaging, household items (dishes, food trays, etc.), electrical (transparent container, light scattering, insulation film, etc.)

styrofoam

Waste polystyrene Types:

(1) General purpose polystyrene: Large number of household products and home appliances, computers, medical and other transparent products

(2) HIPS: greatly improved impact strength and elongation at break, the products are widely used in electrical parts, appliance housing, lunch boxes.

(3) Extruded polystyrene foam and thermoformed articles: thick XPS boards are mainly used as insulation, sound insulation, shock-proof material. Thermoformed products are used extensively for food packaging and snack food containers.

(4) Polystyrene can be made of polystyrene foam products: Styrofoam electrical shock packaging, construction panels, refrigeration and other industries insulation.

The life of the first PS two products is long, they can be recycled by general methods, it is also less pressure on the environment.

The last two kinds of PS products are mostly disposable packaging, the volume is bulky, consumed quantities is large, if not directly deal with the waste, will cause serious environmental stress.

The "white pollution" commonly refers to Styrofoam.

PS recycling method

First, the volume reduction and granulation: This series of GREENMAX machine crush waste EPS into pieces and then the waste EPS will be melted after heating. Then the melted EPS material will be squeezed out and then will be shaped after cooling. At last EPS material will be made into pellets. The methods contained mechanical method, solvent method and heating method.

melted polystyrene foam

Second, crushed polystyrene as a filler: EPS foam products can be used as fillers after crushing, EPS products can be made as follows:

① re-molded into foam products

② concrete composite board products

③ plaster brick sandwich

④ as an asphalt reinforcement

⑤ used as a soil modifying agent

Third, pyrolysis oil or recycled styrene: waste polystyrene foam plastic can be made pyrolysis oil method.

Four other: waste polystyrene foam was used in the manufacture of paints and adhesive

Coating: polystyrene foam was added after grinding can be made of a suitable solvent paint

Binder: a mixed solvent of benzene and esters, adding waste polystyrene foam, anti-settling agents, plasticizers, phenolic resins and other additives, can be made for the cement, steel, wood coating.

Brominated flame retardants brominated polystyrene system: using aluminum dichloride as a catalyst, the waste polystyrene and bromine electrophilic substitution reaction of brominated polystyrene, the amount of bromine containing is up to 60% to 70 % for PET, ABS and nylon flame retardant thermoplastics. Brominated polystyrene inexpensive, good thermal stability and flame retardant effect, the 5 parts amount can have a significant flame retardant effect. And using with antimony trioxide, it has good fire-retardant synergistic effect.

Comments are closed.

Skip to toolbar