Table of Contents
GreenMax Styrofoam Compactor APOLO Series
GREENMAX styrofoam/EPS compactor Apolo Series is a styrofoam recycling equipment that cold-compresses waste foam according to the principle of pressure generated by spiral rotation.
The operation process of the Apolo styrofoam compactor is clear at a glance. Throw the waste styrofoam packaging into the machine hopper where it is crushed into small pieces, then drop it into the screw part where the crushed styrofoam pieces will be pushed out and then densify into blocks without heat.
GREENMAX styrofoam compactor is mainly used for recycling EPS foamed polystyrene, EPS lunch box, XPS insulation board, EPP foamed polypropylene, etc. The Apolo Series styrofoam recycling machine, including Apolo C100, Apolo C200, Apolo C300, can compact your waste foam at a 50:1 Volume Reduction Ratio, thereby helping to save transportation and storage costs.
Why Choose GreenMax Styrofoam Compactor?
1. Easy & Smart Operation
Siemens PLC, Schneider, Phoenix electronic parts to guarantee top performance in operation. P & T dual operation mode leads to a highly efficient and smart operation.
2. Lower Power Consumption
Completely adopts cold pressing technology, no heating is required in the recycling process, and the volume reduction of styrofoam is achieved by screw extrusion
3. Verified Objective Capacity
The capacities for each model verified by SGS laboratory, from 110lbs/h-660lbs/h
4. Total Green Process, Odor Free
Just shred and hydraulic compress, total green process, no odor generated.
5. Available to process moisture material
Drain design at the bottom, easy to handle moisture Styrofoam like fish boxes, coolers.
6. Custom design is available
Strong engineering & design team, with rich experiences in the North American market, can offer you the most professional design to meet your requirements.
7. One-Stop Service
Intco Recycling GREENMAX not only provides styrofoam/EPS compactor but also buys back styrofoam blocs.
Styrofoam Compactor APOLO C100
Technical Data
Capacity: 100 kg per hour/ 220 lbs per hour
EPS Compression Ratio: 50:1
Compressed EPS Density: 570-1140 lbs/cubic yard
Motor Power: 10.25 kW / 13.75 hp
Styrofoam compactor APOLO C200
Technical Data
Capacity: 200 kg per hour/440 lbs per hour
EPS Compression Ratio: 50:1
Compressed EPS Density: 570-1140 lbs/cubic yard
Motor Power: 19.55 kw / 26.22 hp
Styrofoam compactor APOLO C300
Technical Data
Capacity: 300 kg per hour/660 lbs per hour
EPS Compression Ratio: 50:1
Compressed EPS Density: 200-400 kg/m3 / 570-1140 lbs/cubic yard
Motor Power: 29.05 kW / 38.95 hp
CASE-Styrofoam Compactor in Temco
Temco is a well-known logistics company with 5 locations, concentrated in the western United States. Temco is responsible for the transportation services of GE appliances in different regions. And in every transportation process, they always bring back a lot of waste styrofoam packaging materials.
In the beginning, Temco sent this waste styrofoam to local recyclers for processing, but due to various reasons, the two parties terminated the cooperation, so Temco was distressed seeing the huge waste styrofoam occupying a large amount of storage space.
In the next six years, Temco kept looking for solutions and tried other brands of styrofoam compactors, but they were not satisfied. It was not until 2016 that Temco began to cooperate with GREENMAX and began to use GREENMAX styrofoam densifier for recycling. Therefore, all difficulties are solved.
Styrofoam Recycling Machine APOLO SWD SYSTEM
A-C200 + Silo + Wash & Dry System
APOLO SWD SYSTEM is a styrofoam recycling system, especially for contaminated Styrofoam wastes. The contaminated Styrofoam would first be crushed into small scraps and then get washed and dried, and then they would be compacted into Styrofoam blocks.
The Silo system can make the feeding step more convenient and can improve compacting efficiency and quality. The wash & dry system can efficiently clean the dirty Styrofoam packaging applied in the agriculture or fishing industry.
Applicable materials: Styrofoam/EPS, XPS, PSP, especially contaminated Styrofoam/EPS wastes.
Technical Data
Production Capacity: 300kg/h
Compression Ratio: 50:1
Block Size: 380*380mm
Compressed Density: 200-400kg/m3
Advantages
1. Silo system makes feeding more convenient and compression more efficient;
2. Wash & Dry system efficiently cleans the contaminated Styrofoam;
Siemens Control System makes the operation easy and simple;
3. Famous brand components like SIEMENS, PHOENIX, SCHNEIDER, etc;
4. Screw Compression Technology produces continuous logs at a ratio of 50:1;
5. High density and security, no fumes, low utility consumption;
6. An efficient pre-crusher shreds the foam into 20-50 mm size small pieces;
CE/UL/CSA standards;
Remarks: We can design tailor-made GreenMax™ compactors according to customer's special requirements FREE OF CHARGE.





