EPS hot melt machine vs EPS cold compactor which is more suitable for you?

EPS foam recycling industry is an environmental protection industry that has developed rapidly in recent years. Waste foam has always been a headache for people. General EPS foam recycling is to recycle waste foam boxes and some foam products by the waste acquisition station, and then put them into production for secondary sales after crushing, compression, granulation and other processes.

how-to-recycle-waste-eps

In this process, you first need a foam compactor, which can be either a EPS hot melt densifier or a EPS cold compactor. As a manufacturer of foam densifier, we have met many customers who do not know much about these two kinds of equipment. A common problem is: what is the difference between EPS heat densifier and EPS cold compactor?

greenmax-eps-recycling-machines

Principle of EPS hot melt machine

GREENMAX eps densifier

The EPS hot melt machine is widely used as a special machine or with an automatic machine. It adopts high-performance heater and high-precision thermoelectricity, which can accurately control the heating temperature and make the processing stable and efficient.

Through crushing, hot melting and extrusion, the volume reduction problem of dry foamed EPS and EPE foam waste is solved. The machine has simple design, compact structure and low maintenance cost. When the crusher blade is working, it is broken into smaller pieces by cutting the blade. The material will be pushed to the heating cylinder by the high-speed rotating screw. The screw of the host machine can transport and heat the material to reach the hot-melt state, then extrude and cut it into pieces through the hydraulic cutter, which is more convenient for storage and transportation.

Principle of EPS cold compactor

EPS cold compactor is an advanced environmental protection recycling equipment that uses the latest screw rotating pressure principle to break foam waste plastics and perform cold compression and compression treatment.

eps compactor greenmax with cutter

The structure is simple and easy to maintain. During operation, the operator only needs to put foam into the hopper of EPS foam compactor, tear up and break foam blocks through the spiral cutter equipment, break and screw up foam, and the fragmented foam waste treated by the spiral cutter will enter the screw, and then the hydraulic system of the machine will compress the foam fragments in the screw to form EPS foam plastic compact blocks.

Equipment comparison

Whether it is a EPS heat densifier or a EPS cold compactor, the ultimate goal is to compress the volume of foam, but the two methods are different. One is extrusion after melting, and the other is surface melting and compression.

Another point is that the materials of foam are different. If you choose the EPS hot melting machine, some pungent gases will be released under high temperature. Some customers are very resistant to this point, so you should also pay attention when choosing. In terms of compression ratio, it is natural that the fully melted hot melt machine is better.

 

Comments are closed.

Skip to toolbar