EPS foam densifier now plays an important role in foam recycling not only due to the high demand for recycling in the market, but also the simple operation and remarkable effect of the machine itself. Take the GREENMAX recycling machines for example, since 2008, the sales of machines have reached more than 800, with various cases all over the world.

Nonetheless, does everyone know how to operate the EPS densifier correctly, or is there any security risk in your operation?

Here are some basic requirements to ensure your safe operation:
(1) Altitude Requirement: no more than 1,000 m above sea level, otherwise it will be revised according to GB 3859.
(2) Temperature around the Rectifier Transformer shall be -10℃ to +40℃. It cannot be more than +40℃ or less than the condensing temperature in normal use.
(3) The maximum relative air humidity shall be 90% (the air temperature is 5℃ up and down at 20℃).
(4) The amplitude of frequency fluctuation of AC voltage shall be no more than ±2%.
(5) The continuous fluctuation range of the amplitude of the AC sinusoidal voltage shall be no more than ±10% of rated value.

It is generally known that the foam densifier is mainly used for waste disposal, including EPS (Expanded Polystyrene), XPS (Extruded polystyrene), EPP (Expanded Polypropylene) etc. What needs to be emphasized is that this machine is strictly forbidden to handle eps virgin beads/resin (before expanded, still have pentane).
In general, the manufacturer of the EPS foam densifier will write these precautions in the machine manual. For your own safety, please Keep firmly in mind to read it carefully, learn and master the safety rules and keep in mind to obey them when operating the machine.

