DENSIFIERS AND RECYCLING

Densifiers are a staple piece of equipment in the recycling and waste management industries. As the name implies, the purpose of a densifier is to create dense material from lighter materials, to facilitate easier storage and/or handling. Whether the end product is to be used as raw material for manufacturing new products or disposed of, densification of some scrap materials is an indispensable step in recycling, reuse and disposal.

Densifiers can provide volume reduction ratios as high as 50:1, as compared to a typical ratio of 20:1 in high-end compactors. This lower ratio is also typical of balers, which are sometimes referred to as densifiers.

DENSIFIER TYPES

EPS and Styrofoam

As mentioned briefly above, the most common type of densifier is used for compaction of EPS and Styrofoam. These units usually accept irregularly shaped feed and most often can process both EPS and Styrofoam. Depending on the application, they may be hand fed or fitted with a feed conveyor. Thanks to the low density of the plastic foams, any pieces that might be too large for the feeder can simply be broken by hand.

Most foam densifiers operate without the addition of heat, because overheating may break down polymers in the material and weaken the material. Densification is achieved through extreme pressure, applied by hydraulic or electric rams. The air cells in the plastic foam are collapsed, resulting in a great reduction in volume and resiliency.

The output of these units is usually formed into continuous, squared "logs", which can be easily cut or broken into convenient lengths for storage. The unique shape is ideal for stacking and easily arranged in palette ties for storage and/or shipment.

Agglomerators

Specialized densifiers intended for processing plastic films are often referred to as agglomerators. These units shred and heat thermoplastic film just to the melting point, so that it fuses into larger pieces. Heating is usually performed strictly by the friction of the shredding knives. This prevents overheating, which can break down polymers and lower the quality of the end product. Most of these machines use a force feed, often by means of a screw or auger.

The heated material is then quickly cooled, sometimes using water injection and sometimes by air. The resulting granules are sorted by size and smaller particles return to the feeder, to be re-processed to achieve the optimal size. The end result is granules of uniform size and density, suitable for feeding to manufacturing equipment.

THE ADVANTAGES OF DENSIFICATION

Environmental Advantages

Perhaps the most important gains to be achieved through the application of densifiers are the environmental ones. EPS, Styrofoam and thermoplastic films do not readily biodegrade. Although EPS is generally considered safer for the environment and is often used as loose fill, Styrofoam and thermoplastic films contain polymers that are harmful to the environment in many ways.
Estimates place the amount of Styrofoam in public landfills in the US at 25 to 30 percent by volume. Styrofoam can release contaminants into the atmosphere and the soil upon exposure to sunlight. The practice of burning landfills to reduce overall volume creates further hazards when Styrofoam is present, since it produces even more dangerous chemicals when ignited. The EPA has initiated and enforces regulations concerning the burning of landfills.

Thermoplastic films pose many of the same problems. In addition, plastic remanufactured from these films are said to be responsible for the demise of a large number of and marine animals annually through accidental ingestion. The use of plastic bags and similar products is a topic of much controversy throughout the world today.

Because densification greatly aids recycling and remanufacturing of EPS, Styrofoam and plastic film products, responsible individuals and companies are employing densifiers as part of their manufacturing and/or waste disposal processes.

Even in rare cases where these waste products will be disposed of in landfills, densification offers a waste product that is easier to manage, more compact. Densified EPS foam may even be used as a loose fill or retaining material.

SUMMARY

Increased use of plastic foams and films in manufacturing industries worldwide has created a tremendous surplus of non-biodegradable waste to be dealt with. Thousands of consumer products made from these materials are used throughout the world. Because of their resistance to degradation and the complications caused by the toxic materials in some of the materials, proper disposal of these goods is a multi-faceted problem.
Recycling of these materials to remanufacture the product or manufacture new products is the most ecologically sound method of disposing of consumer goods made from materials such as EPS foam, Styrofoam and plastic film. The low density and highly moldable properties of these substances creates many products that present challenges in recycling because of their resiliency, size and shape.
Densifiers offer a means of producing a raw material of uniform shape and higher density that is easier to store, ship and feed. Foam densifiers usually create "logs", while those intended for processing plastic films often produce granulated plastic. Because of their increased weight and reduced volume, the densified products are less likely to end up contaminating the environment and less material is required for the production of new products.

In addition to environmental concerns, there may be fiscal advantages in recycling plastic foams and films for many industries. These include those that use large quantities of these products, as well as those that manufacture them. Because of the benefits provided in the recycling of these materials, these industries may realize savings by installing and using densifiers.

Business owners and managers should carefully analyze the costs involved in purchasing, operating and maintaining densifiers and compare these to the possible gains to determine whether to invest in them. Initial gains may be small, so long-term projections should be considered.

Comments are closed.

Skip to toolbar