An Effective Styrofoam Recycling Program

Once the volume of styrofoam is determined and a recycler secured, the next step is to design an effective collection program. At this stage, the goal is to intercept styrofoam recyclables before they go into the waste stream.

Keep in mind that the success of any program depends on quality control: the ability to separate high-quality recyclable styrofoam packaging that meets the recycler’s specifications from the trash.

When designing a program, pay particular attention to:

• Determining any equipment and storage needs

• Training personnel to separate styrofoam Equipment and Storage Needs

An effective EPS recycling program | EPS densifier

Collection areas for styrofoam packaging should be separate from other recyclables, kept clean and have easy access for loading. Styrofoam can be stacked, bagged, baled or densified depending on the recycler’s requirements. Increase the effectiveness of the styrofoam recycling program by making it as easy and convenient as possible to recycle.

Outside storage bins: If collected styrofoam awaiting pick-up by the recycler is stored outside, a suitable storage area is needed. It must be clean, dry and closed to outside elements since lightweight styrofoam can be blown about in windy areas. Wet, dirty styrofoam is not recyclable. Storage bins may be obtained from the recycler or design a method of containment, as long as it satisfies health and safety requirements. Place storage bins in a secured area that is convenient for the recycler.

Densifiy equipment: To maximize storage capacity, consider installing a small, on-site baler, or use an existing corrugated baler. If the volume of styrofoam is very large, a small densifier may be useful.

Comments are closed.

Skip to toolbar