What types of foam can the Styrofoam densifier handle?

The styrofoam densifier mentioned in this article is a device specially designed for volume reduction of styrofoam. The recycling technology used in this styrofoam recycling machine is hot melt technology. Although we call it a styrofoam recycling machine, this device does not It's not that styrofoam plastic is the only material that can be recycled, it's just because styrofoam is common and the earliest plastic packaging appeared, so it's named after it. However, with the development of the times, more and more foam plastic packaging began to appear, and the recycling technology of GREENMAX is also constantly innovating and strengthening, so the styrofoam densifier has been continuously optimized, and the types of foam that can be recycled are constantly increasing, and the performance is also improving. is constantly being optimized.
styrofoam-eps-polystyrene

Styrofoam densifier recycled styrofoam/EPS/expanded polystyrene

Polystyrene foam (EPS) is a rigid, tough and lightweight thermoplastic product. EPS is usually white and made from pre-expanded polystyrene beads. EPS has the advantages of light weight, high strength and good thermal insulation performance, making it an ideal material for packaging and construction industries. It is the largest commodity polymer produced in the world. This kind of foam is easy to break, and can even be broken by hand. The styrofoam densifier compresses through breaking-melting-base.

Styrofoam densifier recycled EPE foam

EPE foam is also known as a thermoplastic resin that melts easily at high temperatures and can be molded into different shapes, such as foam, pipe, sheet, etc. Therefore, it can be said that it is a plastic that has no smell and smell.

EPE foam is very soft and lightweight, so it is widely used in packaging. Because it provides better protection for fragile and fragile objects by observing the impact. EPE foam is also heat resistant. EPE foam can be easily recycled by melting. EPE foam is water and oil resistant, making it a great insulating material. The density and weight of EPE foam will vary based on many factors. EPE foam is pure white, so it can take on any color by mixing corresponding dyes or colors. EPE foam has high elasticity. We need to pay attention to the knife in the styrofoam densifier crushing bin. The knife for crushing EPE foam is different from the knife for crushing styrofoam. The recovery steps after crushing are almost the same.

styrofoam-densifier-for-plastic-recycling

Styrofoam densifier recycled EPP foam

EPP is a polypropylene plastic foam material. It is a high-crystalline polymer/gas composite material with excellent performance. With its unique and superior performance, it has become the fastest-growing environmentally friendly new pressure-resistant cushioning and heat-insulating material. EPP is also an environmentally friendly material that can be recycled. Compared with EPS (expanded polystyrene), EPP has higher mechanical strength, which greatly expands the application scenarios of foam plastics.

What types of GREENMAX foam densifier are available?

At present, GREENMAX styrofoam densifier is mainly divided into four models, which we call small equipment, medium equipment and large equipment respectively.

GREENMAX styrofoam densifier M-C50

This is the smallest power among all hot-melting machines. It is suitable for small companies that produce less waste. If the factory space and budget are limited, then we recommend this small device.

GREENMAX styrofoam densifier M-C100

This equipment can also be regarded as the smaller power among all hot melt equipment and is suitable for small and medium-sized recycling companies, manufacturers, cutters and other related enterprises.

GREENMAX styrofoam densifier M-C200

This is the most popular model of all hot melt equipment. It is a medium-sized equipment. The appearance of this equipment is not much different from the two small equipment mentioned above. If you want to achieve uniform feeding and save labor , then you can use it with a conveyor belt, because the waste produced by factories that generally use this equipment is not small, and you can use accessories to help complete recycling.

GREENMAX styrofoam densifier M-C300

This equipment is the most powerful of all hot melt equipment. It is a large equipment. In appearance, it is different from other equipment. This equipment is equipped with a silo, which is used to temporarily store the broken foam fragments. At the same time, this equipment can also be equipped with conveyor belts and water cooling systems.

The compression ratio of GREENMAX Styrofoam can reach 90:1, and the compression ratio of styrofoam recycling machines using hot-melt technology is higher. Of course, if you are not interested in hot-melt technology, GREENMAX Styrofoam recycling machine also supports the use of cold press technology and hydraulic technology to recycle.

Comments are closed.

Skip to toolbar